Dishwasher

i10 - Water Supply Error: Indicates no water is reaching the unit due to a closed water tap, a defective inlet valve, float switch, or door switch.

i20 - Draining Issue: This error suggests a problem with the draining process, potentially due to a defective drain pump or the main control board.

i30 - Aqua Control Fault: Indicates an issue with the aqua control system, potentially involving the drain pump, main board, or wire harness.

i40 - Pressure Sensor Error: Shown when there's a problem detected by the analogue pressure sensor, possibly due to a faulty sensor or wire harness.

i50 - Wash Motor Problem: This error is related to issues with the washing motor, which may include a defective wash pump, main control board, or wire harness.

i60 - Heating Element Issue: Indicates a fault with the heating element, potentially involving the heater itself, the main control board, or wire harness.

i70 - Thermistor Error: Displays when there's a problem with the thermistor (NTC), which could involve the main control board or wire harness.

iB0 - Sensor Malfunction: Indicates a problem with the turbidity sensor, possibly also involving the main control board or wire harness.

iC0 - Communication Error: Suggests a communication issue within the dishwasher's systems, potentially involving the main control board, input board 1, or wire harness.

iD0 - Tacho Fault: Related to problems detected by the tacho sensor, which could involve the heater, wash pump, or wire harness.

iE0 - Flow Controller Issue: Indicates a fault with the flow control valve, potentially also involving the main control board or wire harness.

iF0 - Water Level Problem: This error is displayed when there is an issue with water level detection, possibly due to a defective drain pump, pressure sensor, flow control valve, main control board, or wire harness.